West Coast Plastics Equipment, Inc.
(800) 392-8569 - Fax (310) 837-4947 - sales@westcoastplastics.com
Home Login Contact Us Cart Logout
Temposonics Linear Transducers
EP Series Profile-Style Economy Position Sensors
MTS Temposonics EP Profile-Style Economy Linear Transducers are highly repeatable, absolute position sensors for linear measurement. Absolute measurement offers safety for machine and automation devices. With absolute output, position information is instantly available. Power-down situations do not require rehoming of the device.

Using the unique magnetostrictive principle, that MTS pioneered, the sensor precisely senses the position of an external magnet through the housing wall, to measure position with a high degree of resolution and accuracy. The Temposonics EP sensor’s innovative design is a result of MTS’s experience in magnetostrictive technology combined with solid engineering, extremely rugged construction and modern electronics. The Temposonics EP is a precise, durable and cost effective alternative to linear potentiometers. They offer all the advantages of a non-contact position sensor suitable for a wide range of machines and automation applications.

Features

  • Ideal Replacement for Linear Pots
  • Non-contacting Temposonics sensing technology
  • Economical pricing
  • High resolution and linearity
  • Proven reliability and ruggedness


SPECIFICATION SHEET (pdf format)
Specifications

  • Measured Variables: Displacement
  • Resolution:
    • Analog: Infinite
    • Digital: 1 / [gradient x crystal freq. (MHz) x circulations]; controller dependent
  • Non-Linearity: <±0.02% of full stroke (minimum ± 60 µm)
  • Repeatability: <±0.001% of full stroke
  • Outputs:
    • Voltage: 0 to 10 Vdc and 10 to 0 Vdc (controller input resistance RL > 5 kOhm)
    • Current: 4 to 20 mA or 20 to 4 mA (min/max load: 0/500 Ohm)
    • Start/Stop; RS-422 differential signal (Serial parameter upload available for: measuring range, offset, gradient, status, and manufacturer number)
  • Measuring Range: 2 to 60 in. or 50 to 1525 mm.
  • Operating Voltage: +24 Vdc nominal (+20%, -15%)
  • Power Consumption: 50 to 140 mA (output & stroke dependent)
  • Operating Temperature:
    • Head Electronics -40°F to 167°F
    • Sensing Element -40°F to 221°F
  • Sealing: IP65 if mating cable connector is correctly fitted
  • Update Frequency:
    • Voltage or Current: > 1.5 kHz
    • Start/Stop: Controller dependent
  • Warranty: 2 Years
MTS Temposonics Series EP Position Sensor Ordering
To order, complete the code number below by selecting the options desired in each category. Then click the "submit" button.
The part number and price will be displayed on the next page.
E P __ __ __ __ __ __ D 6 0 1 __ __
1 2 3 4 5 6 7 8 9 10 11 12 13 14
1-2. Sensor Model
EP = E-Series Profile-Style Position Transducer

3. Magnet Style (choose S, V, M or L) - Magnets included with all EP sensors
S = Captive sliding magnet with joint at top (Part no. 252182)
V = Captive sliding magnet with joint at front (Part no. 252184)
M = Floating magnet-open ring (Part no. 251416-2)
L = Floating magnet-block style (Part no. 252887)

4-7. Stroke Length - Stroke range = 002.0 to 060.0 in. or 0050-1525mm
(must correspond to Stroke Unit of Measurement selected in Item 8)


8. Stroke Unit of Measurement ( choose U for inches and tenths or M for millimeters)
U = Inches and tenths (Encode in 0.1 inch increments, for example: 0125U = 12.5 in, 1200U = 120 in)
M = Millimeters (Encode in 5mm increments, for example: 0120M = 120 mm, 1200M = 1200 mm)

9-11. Connector
D60 = 6-pin DIN connector, integral, standard

12. Input Voltage
1 = +24 Vdc (+20%, -15%)

13-14. Output Signal (choose V0, A0, A1, R0 or R3)
Analog - Voltage
V0 = 0 to +10 Vdc and +10 to 0 Vdc
Analog - Current
A0 = 4 to 20 mA
A1 = 20 to 4 mA
Digital - Pulse
R0 = Start/Stop
R3 = Start/Stop with sensor parameters upload function

NOTE: Temposonics EP Sensors include one magnet (as defined by model number) and two mounting feet for sensors up to 50 in. One additional mounting foot is included for sensors greater than 50 inches in length.
Temposonics EP Sensors are made-to-order and usually ship in 2-3 weeks, FOB: Culver City, CA.
This page last modified on 6/24/2009
Untitled Page
About WCPE/Contact Info | Terms & Conditions | Request Catalog | Business Hours M-F 8-5PST
For Packaging Equipment & Bag Sealers see our WCPSealers.com website!